Project Spotlight: Chevrolet Silverado 2500 BDS 3-inch Lift, 35-inch Tyres & 5,534 kg GVM

This Chevrolet Silverado 2500 combined a BDS 3-inch suspension lift and 35-inch tyres with a GVM increase to 5,534 kg. KME Vehicle Engineering assessed the modified vehicle as a complete package rather than treating the lift, tyre change and mass re-rating as separate paperwork items.
The modification package
BDS 3-inch suspension lift kit
18 × 9 aftermarket wheels
35 × 12.5 R18 LT tyres
GVM increased to 5,534 kg
Why the whole package needed engineering
A lift changes suspension geometry and vehicle height, while larger wheels and tyres affect wheel-component compliance and can alter the way the modified vehicle must be assessed. Increasing GVM adds another layer because the vehicle's suspension, axle capacities and braking performance must support the proposed rating.
VSB 6 scope
The controlled engineering evidence identified VSB 6 modification codes D3, E3, F1, G4, P1, S1 and S2. The project included wheel and tyre assessment, suspension substitution, brake-system certification, towbar/coupling checks and the GVM re-rating. An abridged brake test was also recorded.
For the national heavy-vehicle technical framework, see the NHVR VSB 6 page. The applicable approval and registration steps still depend on the vehicle and jurisdiction.
The result
For this specific Silverado 2500 and modification package, the completed engineering scope supported a 5,534 kg GVM. The result is vehicle-specific and should not be assumed to apply to every Silverado 2500, BDS lift or 35-inch tyre package.
A GVM increase also does not automatically increase GCM or braked towing capacity. Those are separate ratings and need their own engineering basis where a change is proposed.
Planning a lifted Silverado build?
If you are planning suspension, wheel and tyre changes together with a GVM upgrade, it is worth defining the intended final configuration before parts are selected. KME Vehicle Engineering can assess the proposed package and evidence requirements before certification.


Comments