Project Spotlight: Chevrolet Silverado 1500 GVM Upgrade — 3,300 kg to 3,750 kg

This Chevrolet Silverado 1500 Z71 was engineered in Western Australia for a vehicle-specific GVM increase from 3,300 kg to 3,750 kg. The completed scope included rear suspension changes, a revised rear axle rating, structural assessment and brake testing. The original GCM remained unchanged.
Before and after
GVM: 3,300 kg → 3,750 kg
GCM: remained 6,851 kg
rear axle rating: 1,724 kg → 2,026 kg
vehicle category: NA → NB1
What changed on the vehicle
The front suspension, braking hardware, wheels and tyres remained in their original configuration. The rear suspension was upgraded with an additional leaf in the factory leaf pack and Walkinshaw Performance rear shock absorbers.
Engineering evidence
KME's controlled project evidence records finite-element assessment of the chassis and rear axle, an abridged brake test, vehicle-stability checks and confirmation of the revised axle capacity. The change in vehicle category also required the applicable lighting requirements to be addressed.
This project was assessed within the light-vehicle modification framework. See the Australian Government's VSB 14 technical guidance for the national technical framework; the administrative approval pathway remains jurisdiction-specific.
The result
For this assessed Silverado 1500, the completed engineering scope supported a 3,750 kg GVM. That outcome applies to this vehicle and configuration only. It should not be read as a guaranteed rating for every Silverado 1500, and the GVM increase did not automatically increase GCM or braked towing capacity.
Planning a Silverado 1500 GVM upgrade?
KME Vehicle Engineering can assess the vehicle, current ratings, suspension, axle capacity, tyres, intended operating mass and registration jurisdiction to determine the appropriate engineering pathway.
Explore the Chevrolet Silverado engineering projects, review our GVM upgrade service or use the GVM Upgrade Finder to start with the available options for your vehicle.


Didn't realise how much work goes into a GVM upgrade until reading this. Taking the Silverado from 3,300 kg to 3,750 kg is a decent increase, but it's interesting that the towing capacity doesn't automatically go up with it. We're usually on the motorcycle side of the industry, helping people get cash for motorbikes, so it's good to learn more about these bigger vehicles. The rear suspension changes and brake testing make sense when you're dealing with that much extra weight. Just wondering, if someone buys a used Silverado with a GVM upgrade already fitted, what's the best way to check that everything has been properly certified?